IDC_HELP_FOR_HELP
Hover the mouse over most tools for a moment or two, and a short tool tip will appear with help information about what it does. To see the tip for a drop list, hover the mouse over the arrow.

Some tips end..., which means that they have extra help in this window. Use F1 to show this window at any time. 

For an overview of Virtual Flower and introductory help, see Help | Html Help.

This window is resizable, as are all of the windows - click on the edge of the window and drag.

#~END_ENTRY
IDC_ITERATIONS
Number of layers in the tree...
When you have more layers, the tree gets more detailed with tiny twigs. 

The more layers the tree has, the more demands it puts on the graphics drawing. Virtual flower can manage a few layers quite easily, but if the number of layers is high you will want to choose a faster drawing method.

To adjust the drawing method, go to Picture | Options | Speed / quality. The fastest method of all shows a schematic diagram of the way the branches, leaves and stalks inter-connect, and is very fast to draw - you can also show the tree like this at any time by unselecting Preview tree.

You can hold down the Control key to interrupt the drawing if the picture is taking too long to draw.

If the number of layers is low, then you can choose a slower method with higher quality.

Your VRML browser will probably be able to handle rather more layers than Virtual Flower can. This is something I plan to work on for a future release, which will involve adding DirectX graphics to Virtual flower.
#~END_ENTRY
IDC_LEAF_SHAPES_COMBO
Click on dots, and drag. . .

To add a dot - click on the edge of the leaf.

To remove a dot - Right click

Ctrl+click shifts the view so that the click point goes to the centre - in the Leaves window you can use this to zoom in on any part of the leaf.


#~END_ENTRY
IDC_CHECK_ADD_LEAVES
Add leaves etc. . .
Select to add the leaves, flowers, 3D objects or stalks to the tree.

Use the "Add To" button to select which of these to add.

When unselected, the tree has branches only.

#~END_ENTRY
IDC_CHECK_ADD_STALKS
Add stalks when the tree has leaves

#~END_ENTRY
IDC_CHECK_EDIT_STALKS
Select to edit stalks. Unselect to edit branches.

#~END_ENTRY
IDC_ANIMATIONS
Trees grow, unfold, sway, or rustle

#~END_ENTRY
IDC_LEAF
Click on dots, and drag. . .

Click on the edge of the leaf between two dots to add a dot.

Right click on a dot to remove it

Shift + click and drag dot with mouse - this changes the shape of the entire leaf - moves all the other points in similar fashion. 

Ctrl + click - moves the leaf so that the point you clicked on goes to the centre of view. 

To zoom in on  a detail of the leaf, use Ctrl + click on the point you want to see in more detail, then zoom in.
#~END_ENTRY
IDC_CHECK_PREVIEW_TREE_OUTLINE
S to show tree in true shape, unselect for schematic tree 

#~END_ENTRY
IDC_PICTURE
Picture of tree which you can explore interactively 

#~END_ENTRY
IDC_TREE_PICTURE 
Click and drag, left or right button, or both together, to change shape

#~END_ENTRY
IDC_DRAW 
Choose how the tree is shown

#~END_ENTRY
IDC_BRANCHES_SCALE
Scale for tree in .wrl output file

#~END_ENTRY
IDC_INPUT_FILE
Scene for the VRML...
Virtual flower comes with a few basic scenes you can use. You can add your own by editing the list.

These are really just intended a way to see what the trees are like in the wider context of a VRML scene, complete with lighting etc.  The scenes get inlined into the output - actually inlined - the file you specify as the header here becomes the start of the output file. That's because then the output file can be complete in itself and doesn't need any extra files to go with it - a suitable approach for very small scenes such as these ones.

Though these can be fun to use, if you really get into VRML you will certainly want to build your own ones, probably more complex than these, or including many different objects (maybe several types of Virtual flowers too in one scene). You will need to use other methods to do that - Virtual Flower isn't designed as a VRML scene constructor. It is really just a program for making objects to put into scenes.

There are special scene building programs one can use - visit the on-line VRML repository for information about these (see the help intro for the link). One can also do a fair amount by hand editing of the VRML once one is into it - these basic scenes were made by hand, apart from the starry sky with galaxy flowers, which is the output from virtual flower itself. 


#~END_ENTRY
IDC_OUTPUT_FILE
The VRML file, made when you click APPLY

#~END_ENTRY

IDC_APPLY_NEW_PAGE_ORDER
Click to re-show with the new page ordering

#~END_ENTRY
IDC_FILL_SCREEN
Show a picture of the tree using the entire screen

#~END_ENTRY

IDC_BRANCHES_ABOUT_HORIZONTAL
#~IF EDIT_STALKS
Click on dots, and drag. . .
spreads the stalks out.
#~ELSE
Click on dots, and drag. . .
This also affects the way the tree fans out. The first two branches of the tree will fan out towards or away from you.
#~END_ENTRY

IDC_BRANCHES_TURN_BY
Click on dots, and drag. . .
Creates a spiralling effect for the branches. Rotates each branch about its axis, so affecting the way later branches in the tree grow.

Angle, turn and rotation are synonyms mathematically, though there may be some fine shades of distinction in colloquial use.

The idea of using the words in this distinctive fashion is as a mnemonic - to help remind one which is which.
#~END_ENTRY
IDC_BRANCH_TO_EDIT
#~IF EDIT_STALKS
Shows which stalk you clicked on
#~ELSE
Shows which branch you clicked on
#~END_ENTRY

IDC_RADIO_ART
Angle then Rotation then Turn. . .
Angle from local vertical
then
Rotation about local horizontal
then
Turn about local vertical
#~END_ENTRY

IDC_RADIO_ATR
Angle then Turn then Rotation. . .
Angle from local vertical
then
Turn about local vertical
then
Rotation about local horizontal
#~END_ENTRY

IDC_RADIO_RAT
Rotation then Angle then Turn. . .
Rotation about local horizontal
then
Angle from local vertical
then
Turn about local vertical
#~END_ENTRY

IDC_RADIO_RTA
Rotation then Turn then Angle. . .
Rotation about local horizontal
then
Turn about local vertical
then
Angle from local vertical
#~END_ENTRY

IDC_RADIO_TAR
Turn then Angle then Rotation. . .
Turn about local vertical
then
Angle from local vertical
then
Rotation about local horizontal
#~END_ENTRY

IDC_RADIO_TRA
Turn then Rotation then Angle. . .
Turn about local vertical
then
Rotation about local horizontal
then
Angle from local vertical
#~END_ENTRY
IDC_COMBO_BRANCH_3D_SYMMETRY
Trees, fans, whorls, and some highly symmetrical arrangements. . .
For trees, fans, rosettes and whorls, make the arrangement, then change the numbers of branches and stalks.

For the mathematical shapes, the branches go out to the vertices of the figure. 

If you add a square to each vertex of an octahedron you get a cube, so to make a cube with sheet flowers on each face, add them to branches in the octahedron arrangement. 

Similarly if you add a triangle to each vertex of a cube you get an octahedron, so to make an octahedron type shape with sheet flowers, add them to branches in a cube arrangement.

The same thing applies with the icosahedron and dodecahedron - you get the one from adding the faces to the vertices of the other.

This special property is called duality.

The tetrahedron is self-dual - add triangles to the vertices of a tetrahedorn and you get another tetrahedron.. 

#~END_ENTRY
IDC_NBRANCHES:
#~IF EDIT_STALKS
Number of stalks

#~ELSE
Number of branches at each step

#~END_ENTRY
IDC_TREE
Click and drag, left or right button, or both together, to change shape

#~END_ENTRY
IDC_BRANCHES_FRONT_VIEW
#~IF EDIT_STALKS
Click on dots, and drag. . .
Use this one to change the lengths of the stalks as well as the angles from the local vertical

Spreads the stalks out.
#~ELSE
Click on dots, and drag. . .
Use this one to change the lengths of the branches as well as the angles from the local vertical

This is changes the way the branches fan out.

Adjusts the way the branches fan out to left or right in the first layer of the tree. All later layers fan out similarly - but the directions of the later branches depend on the way the tree has fanned or sprialled in the earlier layers. 

That's why this is called the turn from the local vertical. The local vertical is the line through the middle of the previous branch in the tree - the one that the new branches grow out of.
#~END_ENTRY


IDC_CHECK_ENABLE_TOOL_TIPS


#~END_ENTRY

IDC_FOREST_SPACING
Distance between nearest trees in forest


#~END_ENTRY

IDC_PAGES_ORDER
This lists all the pages you can add to the selected tabbed dialog.

Make the ones you want to show red by right clicking on them. Make the ones you don't want to show blue.

The order in which they are listed is the tabs order. Drag any item you want to move to another position.

When ready, click on Apply Now...  (not the Apply button)

To show any of the pages as a separate window right away (e.g. to check what it is), use Ctrl + click.

The help page can't be added to any of the tabbed dialogs. It is always in a separate window, and is shown by clicking the Help button.

#~END_ENTRY


IDC_AVENUE_DEPTH
#~IF MAKE_AVENUE
Number of trees in each row of the avenue
#~ELSE
Depth of forest in trees. . .
Number of trees in each row along y direction

#~END_ENTRY

IDC_ECHO_OUTPUT
Echo this page in a new window

#~END_ENTRY

IDC_AVENUE_WIDTH
#~IF MAKE_AVENUE
Distance between the two rows of trees
#~ELSE
Width of forest in trees

#~END_ENTRY

IDC_AVENUE_SPACING
#~IF MAKE_AVENUE
Spacing between trees in each row
#~ELSE
Spacing between trees



#~END_ENTRY


#~END_ENTRY
IDC_ECHO_ANGLES
Echo this page in a new window


#~END_ENTRY

IDC_ECHO_BRANCHES
Echo this page in a new window


#~END_ENTRY

IDC_ECHO_LEAVES
Echo this page in a new window

#~END_ENTRY


IDC_ECHO_COLOURS
Echo this page in a new window


#~END_ENTRY

IDC_ECHO_NUMBERSA
Echo this page in a new window


#~END_ENTRY

IDC_ECHO_NUMBERSB
Echo this page in a new window

#~END_ENTRY

IDC_ECHO_FILES
Echo this page in a new window


#~END_ENTRY

IDC_ECHO_ORGANISE
Echo this page in a new window


#~END_ENTRY

IDC_ABOUT
Copyright declaration

#~END_ENTRY

IDC_LEAF_POINT_TO_EDIT
Coordinate number of highlighted point. . .
This is also the number used for this point in the CoordIndex node in the output file.
#~END_ENTRY



IDC_BUTTON_LEAF_ZOOM_IN
Enlarge view by 125%
#~END_ENTRY


IDC_BUTTON_ADD_LEAF_ENTRY
Add to the list of leaf shapes



#~END_ENTRY

IDC_BUTTON_REMOVE_LEAF_ENTRY
Remove this leaf from the list of leaf shapes. . .
You can get the default list back, along with the other defaults,  if you choose Reset Everything from the Files page.
#~END_ENTRY


IDC_IFLOWER_POINT_TO_EDIT
Coordinate number of highlighted point. . .
This is the same as the number that is used for this point in the CoordIndex node in the output file.
#~END_ENTRY

IDC_FLOWER_SCALE
Size of flower relative to tree
#~END_ENTRY

IDC_VRML_FLOWER
Connects the points in order anti-clockwise round the centre. . .
You may wish to do this for VRML output, because current VRML browsers don't always correctly display polygons with boundaries that self intersect, especially if they intersect many times, as these flowers can do.

#~END_ENTRY

IDC_CHECK_ADD_SPHERES
Add spheres to the tree instead of leaves

#~END_ENTRY

IDC_CHECK_ADD_INLINE_FILE_NAME
Adds Inline nodes to the VRML output

#~END_ENTRY

IDC_BUTTON_LEAF_ZOOM_OUT
Reduce view by 80 %


#~END_ENTRY

IDC_NSTALKS_FOR_FLOWERS
1 for each stalk with a flower, 0 for each one with a leaf. . .
The flowers replace leaves - you will only see them if Add Leaves is selected.
If number of entries is shorter than number of stalks, last entry is used for all the remaining stalks.
For example, you can use a single 1 to choose flowers for all the stalks, and a single 0 to choose leaves for them all.


#~END_ENTRY
IDC_BUTTON_FLOWER_ZOOM_IN
Enlarge view by 125%

#~END_ENTRY

IDC_BUTTON_FLOWER_ZOOM_OUT
Reduce view by 80 %

#~END_ENTRY

IDC_CHECK_SHOW_FLOWER_CURVE
Shows the mathematical curve that is used to make the petals. . .
If you are interested in the details - the radial distance to each dot is found by a formula of the form
a+b*sin(c*theta)
with a, b, c chosen appropritately, depending on the petal curve minimum, and the number of petals per copy, etc.

A section of this curve is used for each petal, and the rest of it is ignored.
#~END_ENTRY
IDC_NBRANCHES
Number of stalks, or of smaller branches that grow out of each larger one...

Select "Adjust  Stalks" to change number of stalks instead of branches.

NUMBER OF BRANCHES

To show how it works for the branches: if you set this to 2, then you start with 2 branches, and each branch divides into two more, then each of those divides into two more, and so on. 

Set it to 3, and each branch divides into three smaller ones (so after just a few layers you have a huge number of branches).
Number of stalks, or of smaller branches that grow out of each larger one...

Select "Adjust  Stalks" to change number of stalks at the end of the smallest branches in the tree, instead of the number of branches.

NUMBER OF BRANCHES

To show how it works for the branches: if you set this to 2, then you start with 2 branches, and each branch divides into two more, then each of those divides into two more, and so on. 

Set it to 3, and each branch divides into three smaller ones (so after just a few layers you have a huge number of branches).

The final layer has the smallest branches and that's where the stalks and leaves normally get attached.

NUMBER OF STALKS

Select "Adjust  Stalks" to change number of stalks at the end of the branches in the final layer of the tree (usually these are the smallest branches).

Sometimes it is nice to have leaves or flowers growing out of the sides of the branches at every layer in the tree, rather than just for the final layer. 

For this effect choose more branches than you need for the tree, then go to Flowers Etc | Add To, and click to replace the extra branches by leaves or flowers.

#~END_ENTRY

IDC_WHAT_TO_MAKE_COMBO
Choose arrangement of trees. . .
Single tree at origin
Avenue - two parallel rows of trees centred at origin
Honeycomb forest - trees in a honeycomb pattern centred at origin


#~END_ENTRY

IDC_ORIGIN_COORDS
Coords of origin for VRML relative to yellow dot.

#~END_ENTRY

IDC_FOREST
Click for viewer's position then drag to where you want to look...

Magenta circle shows the viewer's position. Red circle shows the centre. 

To change position of viewer, but look towards same point, just click without a drag.

The middle coordinates give the viewer's height and the height of the position looked at - you can't adjust these with click and drag. Instead - adjust the middle coordinate in the From and To fields
#~END_ENTRY

IDC_CHECK_VIEW_SHOW_TREES_AS_DOTS
Select to see as dots, unselect to see as trees from above

#~END_ENTRY

IDC_CHECK_ADD_VIEWPOINT
Select to add viewpoint made using "Viewpoints" button

#~END_ENTRY

IDC_VIEWPOINTS
Use to make new viewpoint for VRML

#~END_ENTRY

IDC_VIEW_TILT
Angle to tilt from vertical. . .
Tilt is about line to point view is towards.
Point viewed to remains at centre of field of view.


#~END_ENTRY

IDC_CHECK_MEASURE_COORDS_FROM_NEW_ORIGIN
Select to show as coords from red dot. . .
Doesn't affect viewpoint as copied to clipboard, or used in VRML output.
Viewpoint always uses coords from red dot, as this is the origin for the VRML world.
Use Shift + Click to set new origin.

#~END_ENTRY

IDC_REDO_WITH_NEW_BRANCH_NUMBERS
Redo symmetrical arrangement with new numbers. . .
Choose type of symmetrical arrangement first.

Then change number of stalks or branches.

Then click this button to arrange the new numbers of branches/stalks symmetrically, and equally spaced.

Works for fan, whorl or rosette
#~END_ENTRY

IDC_NBRANCHES_ONLY
Number of branches for each layer in the tree

#~END_ENTRY

IDC_NBRANCHES_FOR_STALKS
1s here to replace branch by leaf etc. . .

This can be used to make trees etc with leaves attached at every layer, rather than just to the branches furthest from the root.

The leaf replaces the branch - so no more branches get added to that one in the later layers of the tree
#~END_ENTRY

IDC_ADD_TO
Select positions for 3D objects , flowers or leaves

#~END_ENTRY

IDC_CHECK_DEBUG_LOG
Use if you find a bug. . .
When selected, makes a log file every time you change something that re-enables the Apply button.
- i.e. when you change almost anything.

File is debug.ini

If you find a bug, please send this file to me, with description of bug.

#~END_ENTRY

IDC_BRANCH_TEXTURES
Texture to use for branches (e.g. gif file). . .

Put the file names in quotes if they have spaces:
"branch 1.gif"

If you have several branches, you can have separate textures for each one:
"branch 1.gif" "branch 2.gif" ...
if so, branch 1.gif is used for first branch, branch 2.gif for second etc.

To stretch or compress the texture, add the numbers separated by semicolons, like this:
"branch 1.gif;2;3"

That compresses bark texture by scale of 2 horizontally, and 3 vertically in the local horizontal and vertical directions (S and T directions in VRML terminology) .
#~END_ENTRY

IDC_STALK_TEXTURES
Texture to use for stalks (e.g. gif file)
#~END_ENTRY

IDC_LEAF_TEXTURES
Texture to use for leaves (e.g. gif file)
#~END_ENTRY

IDC_FLOWER_TEXTURES
Texture to use for flowers (e.g. gif file)
#~END_ENTRY

IDC_PETAL_TEXTURES
Texture to use for petals (e.g. gif file)
#~END_ENTRY

IDC_BRANCH_COLOURS
click on the colour to use the colourwheel to change it

#~END_ENTRY

IDC_STALK_COLOURS
click on the colour to use a colourwheel to change it


#~END_ENTRY

IDC_LEAF_COLOURS
click on the colour to use a  colourwheel to change it


#~END_ENTRY

IDC_FLOWER_COLOURS
click on the colour to use a colourwheel to change it


#~END_ENTRY

IDC_PETAL_COLOURS
click on the colour to use a colourwheel to change it


#~END_ENTRY

IDC_RGB_FOR_BRANCHES
r. g. b. values (range 0 to 1)

#~END_ENTRY

IDC_RGB_FOR_STALKS
r. g. b. values (range 0 to 1)

#~END_ENTRY

IDC_RGB_FOR_LEAVES
r. g. b. values (range 0 to 1)

#~END_ENTRY

IDC_RGB_FOR_FLOWERS
r. g. b. values (range 0 to 1)

#~END_ENTRY

IDC_RGB_FOR_PETALS
r. g. b. values (range 0 to 1)
#~END_ENTRY

IDC_COLOUR_WHEEL
Hue, saturation, brightness method of making new colour
#~END_ENTRY

IDC_HUE
Click for hue. . .
For greys, set saturation to min value (0)
Brown is orange with reduced saturation and brightness
#~END_ENTRY

IDC_SATURATION
Click for saturation - amount of pure hue. . .
High saturation gives the pure colour
Low saturation mixes the colour with white - pinks, magnolia white, etc.







































#~END_ENTRY

IDC_BRIGHTNESS
Click for brightness

#~END_ENTRY

IDC_COLOUR_WHEEL_PATCH
This is the colour that will be used
To fine tune, click on patch then type:
Insert / delete to increase / decrease huea
Shift + insert / delete for saturation
Ctrl + insert / delete for brightness
Ctrl + shift + insert / delete for hue, in steps of 6 at a time
#~END_ENTRY

IDC_ADD_COLOUR
Add as new colour


#~END_ENTRY

IDC_REMOVE_COLOUR
Remove this colour

#~END_ENTRY

IDC_ANGLE_TO_ROTATE_LEAF_ABOUT_LOCAL_VERTICAL
Rotate all leaves about their local vertical

#~END_ENTRY

IDC_CHECK_SHOW_AS_YZ_SCALES_WITH_ANGLES
Select to show scales & angles, unselect to show x, y and z scales.

You can make petals at various angles by adjusting the y and z scales. This leads to efficient VRML, as you only need one petal shape for a flower with many petals in it.

Angles are measured from local vertical of flower, and are shown for flat petals as the Petal Bell Curve.

Parabola and cone shaped petals will be at similar angles too, (measuring angle to tip of petal), and of similar lengths. 

The way this is done is that the flat petals are made intially at an angle of 45 degrees, so using that one can work out the angle that will result for any y and z scaling. Cone shaped petals will be close to this angle (at the same angle for the cross section in the y z plane), and parabola ones won't be far out, but for others it is just a hint.


#~END_ENTRY

IDC_PETAL_X_SCALES
Local x-scale - i.e. width of petal

#~END_ENTRY

IDC_PETAL_ANGLE_SHIFTS
Angle offsets about local vertical of flower

This is for flowers such as daisies that have several rows of petals offset relative to each other.

Choose whether to show the angles in whole turns, radians, or degrees from Numbers | Numbers A

You can use fractions here for the offsets.

If a flower has 24 petals, by way of example, and you want to alternate these with another set of 24 petals, use  use 1/48 for the offset if showing angles in whole turns, p/24 if using radians (p for pi), and 180/24 if using degrees. 

Be sure to leave no spaces about the '/' sign, or else put the ratio in brackets: (1 / 48) . This is so that the program can easily tell where one number ends and the next begins.
#~END_ENTRY

IDC_PETAL_BELL_CURVE_COMBO
Choose what type of curve you want for the petal

Poppies are parabaloid as are many, to a good first approximation, possibly because it focuses the sunlight on the stamens and warms them.

Other petals are conical or approximately flat, or may flair outwards.

Petals are made for default y-scale and z-scale of 1 each.

Flat petals are at an angle of 45 degrees.
Cone is at angle of 45 degrees.
Parabola is at angle of 45 degrees to point at xz distance of 1.
When you change to another scale, if you want perfect parabolas or cones, the x and z scales have to be kept identical to each other, but the z scale can be as you like.



#~END_ENTRY

IDC_PETAL_BELL_CURVE
Method to specify local vertical (y coordinate) for petal points

#~END_ENTRY

IDC_BELL_CURVE
Click on dots, and drag. . .

You can drag points back and forth along the petal curve

Look at the 3D picture and the petal window to see the effect of what you are doing. Easiest with Mirror selected - then as you drag a point, it's mirror point on the other side of the petal gets moved in synchrony.

If you want to move the petal points vertically in the y direction, set the petal curve shape to Click and drag points.

You will probably want to set the Cells type to alternating triangles for complex petal shapes.
 
To add a dot - click on the curve - adds it to the petal.

To remove a dot - Right click

Ctrl+click shifts the view so that the click point goes to the centre  - you can use this to zoom in on any part of the leaf.





#~END_ENTRY

IDC_BELL_CURVE_FORMULA
Describe the petal shape using a formula

y is vertical, and x, z horizontal, as is usual in VRML.

Your formula can use any combination of x, d, n, z

d is the distance from petal origin in xz plane.

n is the number of the point - the number you see when you click on the dot - divided by the total number of points.

Your formula can use +, *, -, / for addition, multiplication, subtraction and division. You can use ^, ** or | for exponentiation, so for instance, 2^5 = 32.

It's C for cos, S for sin, E for natural exponentiation, T for tan, P for pi, L for natural log, and R for square root. 

Cos and sin are in radians -  for example, s(p/4) = 1.

You can use these mathematical operations when entering values in nearly all the edit fields of Virtual Flowers.

Here they are used in a special way to make a formula to construct the petal.

#~END_ENTRY

IDC_PETAL
Click on the edge of the petal between two dots to add a dot.

Right click on a dot to remove it

Shift + click and drag dot with mouse - this changes the shape of the entire petal - moves all the other points in similar fashion. 

Ctrl + click - moves the petal so that the point you clicked on goes to the centre of view. 

To zoom in on  a detail of the leaf, use Ctrl + click on the point you want to see in more detail, then zoom in.
#~END_ENTRY

IDC_CELL_TYPE_COMBO
To make a 3D petal you need to divide it into cells - choose the method here

Type None should only be used for flat petals for VRML output as the polygons should be planar according to the spec.

However, Virtual Flowers can draw curved petals without dividing them into cells.

Parallel cells are best used with petals with mirror symmetry.

For other shapes, use alternating triangles, or radial cells. Radial cells add an extra point at the petal origin and join all the other points to it. Alternating triangles are like the parallel cells,  with each one divided into two triangles.

To follow the shape in detail, use the alternating triangular grid or triangulate - this is suitable for instance for petals with 3D curves such as parabolas if you want the interior of the petal to follow the curve of the parabola.

With the triangulate option, the shape gets divided into triangles first. Then each triangle gets subdivided into smaller triangles. 

With the alternating triangular grid, the shape gets divided into several lines along the length of the petal, then these lines are connected horizontally in the style of the alternating triangles to make a gridlike pattern..
#~END_ENTRY

IDC_CHECK_USE_PROTOS
Make tree using PROTOs
The PROTOs method is recommended if your tree has several iterations.

One PROTO is used for the leaves, and another for the branches. Each iteration of the tree is then made by passing the tree for the previous iteration as a child node to the branches PROTO.

Animations are also more efficient, as only the two PROTOs need to be animated

When unselected, the branches are defined for each iteration using DEF, then used at the next iteration using USE.

The USE / DEF method may be better for some small trees.





#~END_ENTRY

IDC_MAX_CYCLE_POINTS
When large, files are large, but speed of rotation changes more smoothly
#~END_ENTRY

IDC_WRL_PRECISION
How many places to show for numbers in the .wrl file

#~END_ENTRY

IDC_CHECK_SAVE_LINES
Whether to show lines

If you select this one and unselect Save Faces then you will see the trees in outline only. 

This is similar in effect to your VRML browser's wireframe view - but the wireframe view often adds extra lines to divide complex shapes into triangles, while this option leaves them out.

#~END_ENTRY

IDC_CHECK_ANAGLYPH_LINES_TRANSPARENT
Make  lines with the same amount of transparency as faces

You can make the faces transparent from Colours | Colour Wheel. 

If you show lines as well you can choose here whether you want them to share the same level of transparency as the faces, or to be opaque. By default they are opaque.

#~END_ENTRY

IDC_CHECK_MAKE_PLANET
Makes a sphere planet centred below the tree

This is inspired by the idea of Saint Exupery's Little Prince actually and his asteroid. 

#~END_ENTRY

IDC_CHECK_SAVE_ANAGLYPH
Saves the virtual flower as an interactive anaglyph

If you want a wireframe type anaglyph, then select Save Lines as well, and unselect Save Faces.

The way it works is that two copies of the tree are made, one red, and one magenta, and they are placed on billboards, and then if you rotate either of them, the rotation is sensed and used to rotate the other one by the same amount. So you can turn them, but because they are on billboards, the one on the left always stays on the left.

This works better for some values of the settings than others. Try experimenting with the settings - for instance opaque lines together with very transparent faces may work well. Try varying the lighting as well..



#~END_ENTRY

IDC_PLANET_SPECULAR_COLOUR
This is the colour of the shiny spot

White for most metals. Gold has yellow highlights. Opals etc have a pearly sheen - maybe pink or light mauve / cyan etc, and so on.


#~END_ENTRY

IDC_PLANET_COLOUR
Planet colour

#~END_ENTRY

IDC_PLANET_RADIUS
Planet radius

Usually the browser will use some approximation to a sphere and if it is large and against a contrasting background, you may notice the polyhedral shape used - which is browser dependent.

#~END_ENTRY

IDC_ANIMATED_TOUR_SECS
Adds animated tour of all the viewpoints in the scene

To make an animated tour then, edit the scene and paste in all the viewpoints you want for the tour, and then select this option and it will automatically be added to the VRML.

#~END_ENTRY

IDC_INDEXED_FACES_CREASE_ANGLE





This is the angle which shows up as a sharp crease in the model

So set this number to a large value if you want the branches to look somewhat rounded even if they have a small number of sides. Set it to 0 for crisp edges to everything.

A right angle is pi/2 so if you want  branches with only four sides to look rounded (somewhat anyway), set this to a little over pi/2, e.g. 1.6

#~END_ENTRY

IDC_PLANET_AMBIENCE
Ambience - the colour you get even in the darkest shadows

This is the light that comes from all directions with no particular source. Example - the colour you get in a room at sunrise or sunset.


#~END_ENTRY

IDC_TRANSPARENCY_FOR_VRML
Range 0 to 1, for the saved model, not shown in the picture*

Ambience - the intensity of colour you get even in the darkest shadows

This is the light that comes from all directions with no particular source. Example - the colour you get in a room at sunrise or sunset.

Shininess - means you get shiny highlights as you do for metals. Select Edit specular colour to change the colour for the spot.

The specular colour is white for most metals. Gold has yellow highlights. Opals etc have a pearly sheen - maybe pink or light mauve / cyan etc, and so on.

Out of doors on a sunny day, the specular colour is yellow as you can see in reflections on water etc, and the ambient light is blue, so this could be done by using a world with blue and yellow lights, with the blue light diffuse. On a cloudy day, both are white.



#~END_ENTRY

IDC_CHECK_EDIT_SPECULAR_COLOUR
Edit to change the colour of the shiny spot

White for most metals. Gold has yellow highlights. Opals etc have a pearly sheen - maybe pink or light mauve / cyan etc, and so on. Comes into play when you have a non zero level for the shininess


#~END_ENTRY

IDC_NUMBERS_OF_PETALS_3D
How many petals there are in each set of petals

Enter the number of petals you want in each set. If you enter a single number here, say 5, and then more than one number in the other fields, all the sets will have the same number of petals.

#~END_ENTRY

IDC_BELL_CURVE_AXIS_COMBO
z and x horizontally, d = distance, n = point number
#~END_ENTRY

IDC_SCALE_FOR_LEAF_ETC
Scale for the leaf
Adjust to make the leaves of the tree larger or smaller

#~END_ENTRY

IDC_STALK_SCALE
Scale for the stalk
Adjust to make the stalks larger or smaller

#~END_ENTRY

IDC_TREE_TO
Click and drag up or down. . .
Adjusts the amount by which the branches reduce (or increase) in scale from each layer to the next.

This corresponds to the way a tree divides first into large branches, then into smaller and smaller twigs - adjust this to make the twigs smaller or larger compared with the main branches.


#~END_ENTRY


#~END_ENTRY

IDC_INLINE_FILE_NAME_TO_ADD
File to inline, or to get faces from

This can be any VRML scene. By way of example, the rowan tree uses berries.wrl as an inline - and in fact berries.wrl was also made using Virtual Flower. In this way one can add berries to every stalk, where the cluser of berries itself is actually  a small complete Virtual Flower type tree. Berries.wrl was saved with no lights or viewpoints or scenery, by choosing "No background" as the scene, and this is probably a good plan in most cases. Also best with no viewpoints, otherwise you get the viewpoints duplicated wherever it occurs in the tree!

When you inline a complete file, then VF will show it as a box - it doesn't actually inline it, or even check that it exists - it just places the name in the output file for your VRML browser to use. The only thing you can do with it in VF is to change the overall scale using the Size (for tree) field in this window. The size of the box is no guide to the scale as VF just shows the box to a fixed size. So, you need to make your output file, look at it in the browser, and if the inline is too large or small change the scale in VF accordingly.

The other option you can choose is to get the first set of faces from a file. A scene will usually be made up of many of them, so normally this method will only find a small fragment of it. By way of example, if you do this with a Virtual Flower file, you will probably find a branch, stalk, leaf or petal here. In VRML terminology, what you find is the first indexed faces set in the file.

A couple of complete shapes are included by way of example, for use with this option:

triacontrahedron.wrl 
smallstellateddodceahedron.wrl

Inlining the first set of faces in this way is the most flexible approach as you can change the colour, and texture, and show the shape as an anaglyph, also use the edge connection / face truncation options too, etc etc.


#~END_ENTRY

IDC_N_GEOD_SUBDIVISIONS
This is for the ellipsoidal heart of a daisy, and the mathematical shapes...

As you increase this number you will see the shape approximate more and more closely to a smooth ellipsoid.

The first step - increasing the number of subdivisions from 0 to 1 - already gives a much better approximation - however when it is set to 0, you can draw many more spheres or ellipsoids in a second, usually about four times as many, which is useful if you have a tree with many flowers on it.

For spheres, this just changes the way the ellipsoid is shown in Virtual Flower - it always gets saved as a "squashed sphere" in the VRML output whatever you do here.  Your VRML browser may well show them as geodesic spheres / ellipsoids too, for reasons of speed, but you can't change the way it does that here.

For mathematical shapes, the subdivisions you make here are saved to the VRML - so what you see is exactly what you get.

Each face is subdivided into a regular pattern of triangles (for triangular faces) or squares (for the cube). The resulting network of faces  is projected outwards to the circumscribed sphere - this is the standard geodesic sphere construction.

The geodesic subdivisions only work with faces of three or four sides. Any remaining faces have to be left out as they would no longer join seamlessly at the edges.

However - by splitting the faces with more sides into triangles, then you can use the geodesic subdivisions with any polyhedron. See: Split faces with five or more sides.

Geodesic spheres are most often made using the icosahedron, however you can also start with any of these shapes. For an on-line web page about it, see

http://mathworld.wolfram.com/GeodesicDome.html




#~END_ENTRY

IDC_CHECK_CLICK_AND_DRAG_TO_SET_ROTATING
This is a way to set the tree or flower rotating continuously...
The speed with which the tree rotates depends on how fast the mouse is moving just before you stop it.

There are two ways to rotate the tree here, depending on whether or not you have Set rotating on release mouse only selected

When that is selected, you drag fast, and then release the mouse button while it is moving.

When it is unselected, you just need to drag and then stop the mouse suddenly, without releasing the button, to set it rotating.

Either way, the way to stop it rotating is to click on the window again,  hold the mouse steady, and release the button without moving the mouse.



#~END_ENTRY

IDC_CHECK_DRAW_ANAGLYPH
Show in 3D as one of those red / blue patterns that you look at with 3D specs
You will need the 3D specs to see them - you often get these with special feature editions of magazines.

Possibly works best if you show the tree / flower as a wireframe - but try some of the other options too. 

Vary the screen distance depending on whether you want to look at the models close up or from far away from the screen - this is not in any particular units as it will depend on the size of the window and the screen. The ratio of these two numbers should be approximately equal to the ratio of the separation between your pupils to the distance to the screen - though it may work better if you set the separation a bit lower than that.

This option can be very useful at times for getting an idea of the 3D shape of your flower or tree.

If you want to save your tree or flower as an anaglyph to VRML, see Output | Output Options.

#~END_ENTRY

IDC_RADIO_PLUMBLINES
This drops a plumbline from every point of the tree to the ground level...
Useful at times to get an idea of the 3D shape.

#~END_ENTRY

IDC_RADIO_FRAME_RECTANGLE
Shows a rectangle at the base of the tree to give an idea of its size and 3D shape
#~END_ENTRY

IDC_RADIO_FRAME_BOX
Puts a box round the tree to help one see its 3D shape...
The grid lines may also help here. The grid lines are in VRML units so this gives an idea of the size of the tree as it will be saved to the VRML output.

#~END_ENTRY

IDC_CHECK_SHOW_RANGE
IDC_CHECK_CONNECT_3D_EDGE_MIDPOINTS
Connects the mid points of the edges of each face to make a new face...

The new face has the same number of sides as the old one. 

This leaves gaps at the vertices - unselect Skip faces for old vertices to show faces there too.

#~END_ENTRY

IDC_CHECK_TRUNCATE_3D_EDGES
Truncates by removing the corners of all the faces...



#~END_ENTRY

IDC_COMBO_BRANCH_SHAPE
Various types of branch...

The  prism and the single face can be twisted - this means if you have a spirally type tree, the branches and trunk can still fit snugly together from each layer to the next - otherwise you may get corners showing at the join if the number of faces is small.

Choose Twist top for that effect.

It changes the prism into an anti-prism if needed, and the single face into a face with one fold.

The word prism may bring to mind those triangular glass prisms used in optics. A mathematical prism however can have any number of sides.

An anti-prism is related to a prism - the faces at the two ends of the prism are joined to each other using a pattern of alternating triangles instead of rectangles. If you make one you will see what it looks like :-).

#~END_ENTRY

IDC_CHECK_TILT
Twists the branches so that each joins smoothly to the next in a spirally tree

#~END_ENTRY

IDC_CHECK_TAPER
Taper the branches and stalks so each joins smoothly to the next

#~END_ENTRY

IDC_NBRANCH_SIDES
Set this high for smooth branches, and low for fast rendering models

#~END_ENTRY

IDC_BRANCH_INLINE
Use any VRML model as the branch to in-line...
This doesn't get shown in Virtual flower, but is given as the file to inline for the branch in the VRML output.

#~END_ENTRY

IDC_BUTTON_MAKE_OBJECT_TREE
Makes a virtual flower consisting of the 3D shape on its own...

Use this to show / make the shape as an object on its own, with no branches, stalks, leaves etc.

#~END_ENTRY

IDC_BUTTON_MAKE_STAR_TREE
This adds a sheet flower to the end of each branch and hides the branches...

Idea is to make a shape with the sheet flowers as its faces. The flowers get rescaled so that adjacent ones just touch, and each one gets rotated so that one of its points is directed towards its neighbour. The number of petals for each flower is set to the number of its nearest neighbours.

If you add faces to each vertex of an octahedron, the result after adding faces in this way is a cube. The other way round, a cube gets changed into an octahedron. 

Similarly the dodecahedron and icosahedron change into each other when you replace the vertices by faces. They are called duals of each other.

The tetrahedron changes into another tetrahedron - it is the same as its dual - and it is called a self-dual figure.

The petals of the flowers will all touch each other if all the faces in the dual are perfectly symmetrical (or "regular") - for instance it works if the faces are squares but not if they are rectangles. If the flowers can't be scaled to touch exactly, they are made small enough so that some of the petals just touch, and none overlap.

You can adjust the size of the flowers and rotate them from Flowers etc | Sheet flowers.

#~END_ENTRY

IDC_COMBO_OBJECTS
Choose from 3D flowers, various mathematical shapes, or inline

#~END_ENTRY

IDC_EMISSIVE_FOR_VRML
Shows 1 for emissive, 0 for not, in colour order...
Emissive means it shines like a light in a VRML scene. This field shows 1s or 0s for all the colours  so starts with first branch  colour, second  and subsequent branch colours, then stalk colours etc.

You can also switch it on / off using a check box in the colour wheel.

To see the effect of your change, you need to output the model to a VRML scene, e.g. using the Output window.


#~END_ENTRY

IDC_CHECK_SHOW_TRANSPARENCY_NUMBERS
To see the effect - save and show model as VRML...

Numbers are triples, for transparency ambience and shininess. in range 0 to 1,

Ex 1 for full transparency for first number, will hide it, 0.5 for partly transparent. 

The ambience parameter affects how strongly it responds to any ambient light in the scene, and shininess, how strongly it reflects any directional light in the scene.




#~END_ENTRY

IDC_CHECK_ENABLE_CLICK_DRAG_NUMBER_CHANGES_SINGLE_LINE_MULTI_SEL
For multi-line fields - use Ctrl + click / drag or Ctrl + page up / down...

This option is for for single line text fields only.

For multiple line ones then you need to use Ctrl + click  & drag or Ctrl + Page up / down. Those work whether or not this option is selected



#~END_ENTRY

IDC_CHECK_ENABLE_CLICK_DRAG_NUMBER_CHANGES
Click on single number e.g. layers, then drag mouse up / down...

If you click on e.g. the Layers text field, and then drag the mouse up and down (i.e. beyond the boundaries of the text field) you will see the number change. This tip works with any of the numbers in Virtual flower that occur singly, or if you select the option to let this work also with several numbers to a line.

Keyboard shortcut : position typing caret on or after the number and use Ctrl + Page up / down. Works in single or multiple number fields.


#~END_ENTRY

IDC_COLOURS_FOR_BRANCHES_P1
Choose ordering for branch  colours...

To make branches of several colours, go to the Colours window, click on the Branches colour bar, and use duplicate, then change each colour in turn.

Then to set which colours to use on  the tree - if you use cycle colours, then the branches are coloured in order - the first branch colour, then the second, and the colours repeat if you have many branches. 

With cycle colours switched off, you can set the colour order  yourself.

Example: You have four branch colours. Then:
1 1 2 2 3 3 4 4
colours the  first two branches using the first colour, second two branches in the second colour, and so on.

If you enter fewer numbers than there are branches, then all the remaining branches are coloured using the last colour in the list.
#~END_ENTRY

IDC_COLOURS_FOR_STALKS_P1
Choose ordering for stalk colours...

To make stalks of several colours, go to the Colours window, click on the stalks colour bar, and use duplicate, then change each colour in turn.

Then to set which colours to use on  the tree - if you use cycle colours, then the stalks are coloured in order - the first stalk colour, then the second, and the colours repeat if you have many stalks . 

With cycle colours switched off, you can set the colour order  yourself.

Example: You have four stalk colours. Then:
1 1 2 2 3 3 4 4
colours the  first two stalks using the first colour, second two stalks in the second colour, and so on.

If you enter fewer numbers than there are stalks , then all the remaining stalks are coloured using the last colour in the list.



#~END_ENTRY

IDC_CHECK_SUBIDIVIDE_NON_GEOD_POLYS
Particularly useful for geodesic subdivisions...

The geodesic subdivisions only work with faces of three or four sides. The remaining faces have to be left out as they would no longer join seamlessly at the edges.

But by splitting the faces with more sides into triangles, then you can use the geodesic subdivisions with any polyhedron.

If you see a face with more than four sides with this check box switched on - make sure you have Geod or split last selected. For instance, truncation may lead to faces with five or more sides, if applied after the split.
#~END_ENTRY

IDC_CHECK_CYCLE_STALK_COLOURS
Select to use colours in rotation, unselect to set  order yourself...

To have any effect, then you need to have more than one colour for the stalks, or leaves etc.  A quick way to make new colours is to click on the colour patch for each type of object in the Colours window, then using the Duplicate Colour button then edit the duplicated colour.

When selected, then the stalks and the leaves etc use the given colours in order so the first stalk or leaf in each cluster uses the first colour, second one uses the second and so on.

When unselected, then you can set the colour numbers for each one individually in the Numbers A window.


#~END_ENTRY

IDC_CHECK_CYCLE_COLOURS
Select to use branch colours in rotation, unselect to set  order yourself...

To have any effect, then you need to have more than one colour for the branch.  A quick way to make new colours is to click on the colour patch for the branches in the Colours window, then use the Duplicate Colour button and  edit the duplicated colour.

When selected, then the branches use the given colours in order so the first branch in each cluster uses the first colour, second one uses the second and so on.

When unselected, then you can set the colour numbers for each branch individually in the Numbers A window.
#~END_ENTRY

IDC_CHECK_COLOR_FACES_BY_NUMBER_OF_SIDES
Colour of each face depends on number of sides...

Usually the face with fewest sides in the shape uses the first colour. 

When unselected, a single colour is used for the entire object - the Flower colour in the Colours window (can be in several colours if used on a tree with many stalks).

When selected, then the effect depends on whether you have Colour code for commonly used number of sides selected.

If that's unselected, then no matter how many sides the faces have the face with the smallest number of sides uses the first colour. So for instance a dodecahedron and a tetrahedron will both be coloured entirely using the first colour-. A prism and a pyramid with two typesof face will use the first two colours, and so on.

When unselected, then the colour coding is absolute so for instance a tetrahedron and a decahedron will be coloured differently.

T-riangles use the first colour, then squares, then pentagons, then hexagons use the fourth colour.

The remaining colours are used in order for: octagons, decagons, other polygons, star pentagons, star heptagons, star octagons, star decagons, and finally for the twelfth colour, other star polygons.


#~END_ENTRY

IDC_CHECK_COLOUR_CODE_BY_NUMBER_OF_SIDES
Colour code - first colour always for triangles for instance...

When this is selected, the colour coding is absolute - triangles use the first colour, then squares, then pentagons, then hexagons use the fourth colour.

The remaining colours are used in order for: octagons, decagons, other polygons, star pentagons, star heptagons, star octagons, star decagons, and finally for the twelfth colour, other star polygons.

This distinguishes the colours for all the faces needed for many geometrical shapes, though it doesn't work in the case where the shape has e.g. several faces with the same number of sides (e.g. square and rectangular).


#~END_ENTRY

IDC_CHECK_STRIP_MEASURE_WIDTH_ALONG_EDGE
when selected,strip width is measured along the edge...

This affects the objects, branches and stalks only.

If say the width is 10 %, then the strip joins to a point ten percent of the way along the next (and previous) edges.

If the edges to either side are long, the strip is wide, if they are narrow it is narrow. Also if the angle from this edge to the next is shallow, the strip is narrow.




#~END_ENTRY

IDC_CHECK_STRIP_STAR_POLY
Strips for star faces have extra gaps where edges cross...

When unselected, the strips for star faces are done as separate polygons. When selected, the whole thing is done as one polygon, and you get gaps if the perimeter of the polygon winds around a point an even number of times.


#~END_ENTRY

IDC_CHECK_STRIP_INTERWEAVE
You need to select option to outline shaded shapes to see this...

When selected, you get an interweaving type visual effect. Easiest to just try it out to see what this means.


#~END_ENTRY

IDC_CHECK_NO_OUTLINE
Show lines around all the polygons...

If you want to see the lines in the VRML output you will also need to select Output | Output Options | Save Lines.
#~END_ENTRY

IDC_CHECK_DO_NVF_FIGURES
Show a fragment of the object


#~END_ENTRY

IDC_NVF_FIGURES
How many faces (or vertex figures) to show


#~END_ENTRY

IDC_COMBO_SORT_FACES
Choose the order of the faces for fragmentary object...

This also affects how the faces are saved in the VRML output - and which faces are shown first if the drawing times out.

Facet centre has different effect in 3D and in higher dimensions.

In 3D it orders them by distance from centre of shape

In 4D or higher, it orders by distance from the centre of one of the 3D facets.


#~END_ENTRY

IDC_CHECK_SORT_FACES_REVERSE_SORT
Sort the faces in reverse order


#~END_ENTRY

IDC_CHECK_STRIP_CONSTRUCTION_FACES
Hollow faces, with strips for the edges - for objects...

Similar effect to making the shape out of strips of card or paper for its edges.


#~END_ENTRY

IDC_CHECK_STRIP_CONSTRUCTION_FACES_FOR_SHEET_FLOWERS
Show sheet flowers with strips for the edges...

This is actually done by drawing two copies of the flower, one normal size, then another reduced in size by the strip width - then the two are joined together to make a single polygon. 

So - where the curve of the flower runs directly away from or towards its centre the strip is very narrow or just a line. Where the curve runs along a circle around the centre, then the strip is at its widest.



#~END_ENTRY

IDC_CHECK_STRIP_CONSTRUCTION_FACES_FOR_SHEET_LEAVES
Show sheet leaves with strips for the edges...

This is actually done by drawing two copies of the flower, one normal size, then another reduced in size by the strip width - then the two are joined together to make a single polygon. 

So - where the curve of the leaf runs directly away from or towards the point at its base, the strip is very narrow or just a line. Where the curve runs along a circle around the point at its base, then the strip is at its widest.


#~END_ENTRY

IDC_CHECK_STRIP_CONSTRUCTION_FACES_FOR_TREES
Hollow faces, with strips for the edges - for branches or stalks...

Similar effect to making the shape out of strips of card or paper for its edges.


#~END_ENTRY

IDC_CHECK_STRIP_CONSTRUCTION_FACES_FOR_3D_FLOWERS_AND_LEAVES
Strips for the edges - for 3D flowers and curved leaves...

Similar effect to making the shape out of strips of card or paper for its edges.

If the flowers or leaves are subdivided into cells, 
strips are used for the edges of all the cells.


#~END_ENTRY

IDC_VSCROLL_NVF_FIGURES
Increase or decrease number of faces (or vertex figures) to show


#~END_ENTRY

IDC_CHECK_STRIP_FIXED_WIDTH
This only affects sheet leaves sheet flowers and star sphere faces...

Especially useful for star spheres.

When selected, then if the leaves, sheet flowers or star polygon faces are made larger, then the strip width is smaller in proportion.

The effect is that in a shape with faces, leaves or flowers of different sizes, the strips are all the same size.


#~END_ENTRY

IDC_EDIT_FACE_STRIP_WIDTH
affects the width of strip for strip construction faces


#~END_ENTRY

IDC_VSCROLL_FACE_STRIP_WIDTH
increase or decrease the strip width


#~END_ENTRY

IDC_RADIO_VRML_VIEWER_HTM
Show using program associated with the .HTM or .HTML extension


#~END_ENTRY

IDC_RADIO_VRML_VIEWER_WEB_PAGE
Show VRML embedded in a web page


#~END_ENTRY

IDC_RADIO_VRML_VIEWER_CUSTOM
Show VRML using program associated with another extension (e.g. .VRML or .TXT)
#~END_ENTRY

IDC_RADIO_VRML_VIEWER_BROWSE
Browse for the program to use to show the VRML output


#~END_ENTRY

IDC_RADIO_VRML_VIEWER_WRL
Show VRML output by association for .WRL files


#~END_ENTRY

IDC_VRML_VIEWER_CUSTOM
Enter file extension e.g. .VRML or .TXT to choose program to show .WRL output
#~END_ENTRY

IDC_VRML_VIEWER_WEB_PAGE_XPIXELS
Width for embedded output in web page


#~END_ENTRY

IDC_VRML_VIEWER_WEB_PAGE_YPIXELS
Height for embedded output in web page


#~END_ENTRY

IDC_VRML_VIEWER_BROWSE
Program to use to show the VRML output


#~END_ENTRY


IDC_COMBO_MENU_TO_ORGANISE
Choose tabbed dialog to modify...
This configures the tabbed dialogs you show using the All button at the bottom of some of the menu popups.


#~END_ENTRY

IDC_RESET_TABBED_DIALOGS
Reset all windows to their preset tabbed dialogs
#~END_ENTRY

IDC_RESET_UNASSIGNED_TABBED_DIALOGS
Reset all windows that have become unassigned to any tabbed dialogs...

After you have removed items from one of the tabbed dialogs and added them to others there may be some left that you haven't assigned to any of the tabbed dialogs. This button assigns them to their preset dialogs


#~END_ENTRY

IDM_SAVE_AND_SHOW_WRL
Save the 3D output and show it in your VRML browser...

You may need to install a VRML browser such as Cortona first before you see anything for this button.
#~END_ENTRY



IDC_RESET_TREE_MOUSE_ZOOM_ETC
Resets the tree or shape to its preset position


#~END_ENTRY

IDC_EDIT_CURRENT_DIRECTORY
Current folder for the virtual flower files


#~END_ENTRY

IDC_COMBO_VIRTUAL_FLOWERS_FILES2
Select from drop list of virtual flower files


#~END_ENTRY

IDC_BUTTON_FLOWERS_ETC
Navigate to the example flowers, trees and shapes folder


#~END_ENTRY

IDC_BUTTON_STAR_SPHERES
Navigate to the example star spheres folder


#~END_ENTRY

IDC_FLOWERS_MAKE_MIN_FOR_STAR
Sets Minimum to make star traced with straight lines from point to point...

To see how this works, set the dots per petal to 2, number of repeats and turns to 1 and number of petals at least 5.

Then for a 5 pointed star, this will indent the star enough for the indented points to lie on the lines of a perfect pentagram. Similarly for larger number of points.

For 7 or more points then you have alternative ways of doing it, depending on how many times you go around the centre if you trace the star using straight lines. For 7 points, then you can go around the centre 2 or 3 times. Set the star cycles to 2 or to 3 and then use this button to see the difference.

So how much this indents depends on the number of petals and the number of star cycles. 
#~END_ENTRY

IDC_PETAL_STAR_CYCLES_FOR_DEPTH
Number of times to go around centre for the Set to star min button...

Set this to 2 for the pentagram.

For stars with more points (petals) then you can enter any number between 2 and half the number of petals. E.g. for 7 point star, can be 2 or 3.

You can also enter numbers between half the number of petals and number of petals less 2. So for 7, 4 and 5 are also acceptable, 4 has same effect as 3 and 5 same effect as 2.

If out of range then that's okay, will just use the nearest number within the necessary range.



#~END_ENTRY

IDC_NPETALS
Basic number of petals - or points to the star

Depends on the other settings. Total number of petals is this number multipied by the number of repeats.

Formula for the curve is
radius=d+(1-d)*(1+cos(n*theta/k))/2);

where 
d = minimum
n = number of petals
k = turns
theta = angle about centre.

and the curve is worked out about the midpoint of the individual petals - so separately for each petal, where total number of petals in all repeats = petals * repeats



#~END_ENTRY

IDC_SETS_OF_PETALS
Increase for more and smaller petals, total is petals * repeats

Formula for the curve is
radius=d+(1-d)*(1+cos(n*theta/k))/2);

where 
d = minimum
n = number of petals
k = turns
theta = angle about centre.

and the curve is worked out about the midpoint of the individual petals - so separately for each petal, where total number of petals in all repeats = petals * repeats

#~END_ENTRY

IDC_NPETAL_CYCLES
Increase this for shallower petals.

Formula for the curve is
radius=d+(1-d)*(1+cos(n*theta/k))/2);

where 
d = minimum
n = number of petals
k = turns
theta = angle about centre.

and the curve is worked out about the midpoint of the individual petals - so separately for each petal, where total number of petals in all repeats = petals * repeats


#~END_ENTRY

IDC_DOTS_PER_PETAL
Dots to show on each petal - joined with straight lines


#~END_ENTRY

IDC_PETAL_DEPTH
How close the curve gets to the centre, e.g. 0.5 for half way...

This can also be negative or > 1


#~END_ENTRY

IDC_CHECK_DO_VRML_LEAF
Reconnects dots so perimeter can be traced in one direction around its base...

Results always in a fan shaped type of leaf like a fan around the base of the leaf.

Leaves with lines that cross each other are ambiguous in VRML scenes if you do VRML output, so often don't render well. So one place this is useful is as a quick way to fix the leaf so it looks okay in a VRML scene - but it may change its shape.
#~END_ENTRY

IDC_CHECK_DO_VRML_PETAL
Reconnects dots so perimeter can be traced in one direction around its base...

Results always in a fan shaped type of petal like a fan around the base of the petal .

Leaves with lines that cross each other are ambiguous in VRML scenes if you do VRML output, so often don't render well. So one place this is useful is as a quick way to fix the petal so it looks okay in a VRML scene - but it may change its shape.


#~END_ENTRY

IDC_DEFAULT_SPEED_AND_QUALITY
Fast, doesn't split intersecting faces, may get confused about faces in front...

Configured in detail in the Picture Options window in Picture drop menu.

This just draws the faces in order from back to front so the last drawn ones are in front. Works reasonably well to give an idea of the shape especially for strip type faces.

But if faces intersect, you need to split them to draw them properly, and sometimes also faces are at the same distance, or sometimes the face which is furthest away on average should be drawn over the top of another face which it overlaps at a point where it is further away.
#~END_ENTRY

IDC_WIRE_FRAME
Just the edges. Fast, but may not get such a clear sense of depth...

Configured in detail in the Picture Options window in Picture drop menu.


#~END_ENTRY

IDC_HIGHEST_QUALITY
This splits the faces if necessary and draws them in depth order...

Configured in detail in the Picture Options window in Picture drop menu.


#~END_ENTRY

IDM_OUTPUT_SINGLE_OBJECT_PRESET
Preset of single tree or object, SHIFT  + click for simplest version...

Shows just a single object with blue sky for background and viewpoints to let you see it from various directions within the VRML scene.

For the simplest version with no sky, and no viewpoints, just the object or tree, use SHIFT + click on this button.

This only makes a difference in the output VRML scene as the viewpoints and the scene aren't used in the Virtual Flower program itself.

If you want to export it for import into another program e.g. a 3D converter to convert to other 3D formats, it is probably best to switch off "Make from PROTOS" as well in the Output >> Output Options window.

That's because some VRML importers can't import 3D objects made with protos, and even if they can be imported, they will be hard or impossible to convert into other file formats without the same coding capabilities as VRML.
#~END_ENTRY

IDM_OUTPUT_TREE_AND_ISLAND_PRESET
Preset of tree or object on an island in a sea...

Selects "Single Tree" with "island in sea" as the scene for output and "approach from afar" as the viewpoints.

SHIFT + CLICK for island with lake.

This only makes a difference in the output VRML scene as the viewpoints and the scene aren't used in the Virtual Flower program itself.
#~END_ENTRY

IDM_OUTPUT_GRASSY_AVENUE_PRESET
Preset of tree or object  in two rows as an avenue, SHIFT + CLICK for forest...

Selects "Avenue" with "grassy plain" as the scene for output and "approach from afar" as the viewpoints. SHIFT + CLICK to select forest instead of avenue.

This only makes a difference in the output VRML scene as the viewpoints and the scene aren't used in the Virtual Flower program itself.
#~END_ENTRY

IDC_BUTTON_MAKE_600_CELL
Analogue of the icosahedron in 4D. SHIFT + CLICK to show within icosahedron...

All its faces are tetrahedra, five meeting at each edge. No analogue in higher dimensions.

Considered to be analogue of the icosahedron because icosahedron has five triangles meeting at each vertex.
http://en.wikipedia.org/wiki/600-cell

SHIFT + CLICK shows it with hyper perspective within an icosahedron formed from some of its triangular 2D faces


#~END_ENTRY

IDC_BUTTON_MAKE_120_CELL
Analogue of dodecahedron in 4D. SHIFT + CLICK to show within dodecahedron...

All its faces are dodecahedra, three meeting at each edge. No analogue in higher dimensions.
http://en.wikipedia.org/wiki/120-cell

SHIFT + CLICK shows it with hyper perspective, within one of its dodecahedron facets.


#~END_ENTRY

IDC_BUTTON_MAKE_CROSS_SET
Dual of the hypercube, SHIFT + CLICK to show within tetrahedron facet...

Analogue of the octahedron. Generalises to any number of dimensions.

See http://en.wikipedia.org/wiki/Cross-polytope

In 4D it has 16 tetrahedral facets:
http://en.wikipedia.org/wiki/16-cell 

SHIFT + CLICK to make a 3D projection with all the edges, faces etc. projected inside one of the facets.


#~END_ENTRY

IDC_BUTTON_MAKE_DEMI_HYPERCUBE
Omits alternate vertices of hypercube. SHIFT + CLICK to show within simplex...

In 4D is the 16 cell, and same as cross polytope
http://en.wikipedia.org/wiki/Demihypercube
Can be used to tile 4D space:
http://en.wikipedia.org/wiki/16-cell_honeycomb


#~END_ENTRY

IDC_BUTTON_MAKE_24_CELL
Self dual, octahedron facets. SHIFT + CLICK to show within octahedron facet...

Three octahedron facets around each edge.
No analogue in any other dimension.
http://en.wikipedia.org/wiki/24-cell

Can be used on its own to tile 4D space:
http://en.wikipedia.org/wiki/Icositetrachoric_honeycomb
#~END_ENTRY

IDC_BUTTON_MAKE_HYPER_CUBE
Higher dimensional analogue of cube...

In 4D you can use SHIFT + CLICK to show everything projected inside a cube facet...

See http://en.wikipedia.org/wiki/Hypercube

You get this in all dimensions. It is easy mathematically to construct a hypercube in dimension n+1 from a hypercube in dimension n. Just add another n dimensional hypercube shifted one unit into the n+1th dimension, and add lines joining the two n-dimensional hypercubes to each other.


#~END_ENTRY

IDC_BUTTON_MAKE_SIMPLEX
Higher dimensional analogue of tetrahedron...

See http://en.wikipedia.org/wiki/Simplex

You get this in all dimensions. 

To get the simplex in dimension n+1 from the one in dimension n, just add a new point equidistant from all the other points, and join it up with lines to all the other points.


#~END_ENTRY

IDC_CHECK_HYPER_PERSPECTIVE
Like 3D perspective, faces are drawn smaller if further away in hyperspace


#~END_ENTRY

IDC_HYPER_DISTANCE
How far away the shape is in the higher dimensional space - set LOW for exaggarated hyper perspective...

When the shape is close to you, then the near faces seem much larger than the far faces. E.g. set this to 1 and if the shape is 1 unit across the far faces are twice the distance of the near ones.

When this is high, so shape is far away, then both faces are similar in distance from you, so the hyper perspective is less noticeable.

Later could have an option here to the distance here differently for each of the dimensions.

As it is at present, this same distance is used for all the dimensions. 

What happens mathematically is that this number gets added to the coordinates in all the dimensions before the projection is made.
#~END_ENTRY

IDC_CHECK_VRML_UPPER_CASE_FOG
This puts all occurences of fogType  "EXPONENTIAL" and "LINEAR" into upper case...

Defaults to CHECKED. 

This is needed for view3dscene which doesn't recognize the fogType in the output file unless it is in upper case. Perhaps other VRML viewers also may need them to be in upper case.

The scene can be edited by the user who can also add new scenes to the droplist. This does not modify the original scene, just modifies the copy of it used in the output file.
#~END_ENTRY
